Wilwood rear brake caliper and rotor kit - Powerlite PL4R radial mount calipers with Vented, Slotted and Drilled Discs. 
Include Wilwood’s MC4 mechanical parking brake for left and right-hand

Min Wheel Diameter Required: 15 inch
Spindle Type Used: Factory Disc Spindle
Mount Type: Radial
Caliper Type: 4 piston - Powder Coated
Rotor Size: 11.38 x 0.81 inches (289mm x 20mm)

Fits:
Porsche 914/4 - 1970 to 1976

Rigid Powerlite PL4R Front Brake Kit using OE hubs

Many of the Porsche 914 sports cars that continue to be driven today are now modified with more power than the original VW flat four-cylinder engine. With that added power comes the need to upgrade the braking system and Wilwood Disc Brakes has the perfect solution.
New front brake kits are now available for 1970-76 Porsche 914/4 when used with a 914/6 or 911, 19mm master cylinder. 

Kits include forged aluminum Powerlite four piston calipers, brackets and hubs, combined with larger plain face or SRP drilled and slotted vented rotors. Wilwood’s upgraded brake kits weigh substantially less than the smaller, unvented factory brakes with iron calipers and will help with the power and performance of your Porsche 914

Kit Features:

• Forged aluminum calipers are lighter and stiffer than cast iron and have been proven over decades in countless road races, rally and off-road competitions
• Aluminum mounting rotor adapters, brackets and hubs make the kits substantially lighter than stock while increasing braking performance and stamina
• Wheel studs are included with the front kits (user to supply correct lug nuts for wheels being used)
• Rigid Powerlite four piston radial-mount calipers are engineered to improve braking performance and feature pistons size

Calipers: Powerlite PL4R

• Rigid Powerlite four piston radial-mount calipers are engineered to improve braking performance and feature pistons sized to maintain the 914’s proper front-to-rear brake bias
• Caliper profile allows fitment in many small diameter wheels and quick-clip top pad retainer allows fast pad changes 
• Calipers are finished in durable gloss red or gloss black powder coat
• Rear kits include Wilwood’s MC4 mechanical parking brake in left and right-hand configuration, plus the needed cable kit

Rotors: Spec37 Plain or SRP Drilled & Slotted

• Larger and thicker vented rotors provide greater brake torque and resist thermal distortion with curved vanes that circulate cooling air
• Both front and rear rotors are 289mm x 20mm (11.38”x0.81”) premium proprietary Spec37 iron alloy rotors with 36 curved vanes
• Both front and rear rotors are available in a precision plain face or SRP drilled and slotted patter

Brake Pads: BP-10

• BP-10 street performance pads provide smooth and consistent response with long wear over a broad range of temperatures

Installation Parts:

• Kits include caliper brackets, Flexlines and premium grade installation hardware

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

140-17475-D

The product you are viewing cross references to these numbers

Wilwood rear brake caliper and rotor kit - Powerlite PL4R radial mount calipers with Vented, Plain Discs. 
Include Wilwood’s MC4 mechanical parking brake in left and right-hand

Min Wheel Diameter Required: 15 inch
Spindle Type Used: Factory Disc Spindle
Mount Type: Radial
Caliper Type: 4 piston - Powder Coated
Rotor Size: 11.38 x 0.81 inches (289mm x 20mm)

Fits:
Porsche 914/4 - 1970 to 1976

Rigid Powerlite PL4R Front Brake Kit using OE hubs

Many of the Porsche 914 sports cars that continue to be driven today are now modified with more power than the original VW flat four-cylinder engine. With that added power comes the need to upgrade the braking system and Wilwood Disc Brakes has the perfect solution.
New front brake kits are now available for 1970-76 Porsche 914/4 when used with a 914/6 or 911, 19mm master cylinder. 

Kits include forged aluminum Powerlite four piston calipers, brackets and hubs, combined with larger plain face or SRP drilled and slotted vented rotors. Wilwood’s upgraded brake kits weigh substantially less than the smaller, unvented factory brakes with iron calipers and will help with the power and performance of your Porsche 914

Kit Features:

• Forged aluminum calipers are lighter and stiffer than cast iron and have been proven over decades in countless road races, rally and off-road competitions
• Aluminum mounting rotor adapters, brackets and hubs make the kits substantially lighter than stock while increasing braking performance and stamina
• Wheel studs are included with the front kits (user to supply correct lug nuts for wheels being used)
• Rigid Powerlite four piston radial-mount calipers are engineered to improve braking performance and feature pistons size

Calipers: Powerlite PL4R

• Rigid Powerlite four piston radial-mount calipers are engineered to improve braking performance and feature pistons sized to maintain the 914’s proper front-to-rear brake bias
• Caliper profile allows fitment in many small diameter wheels and quick-clip top pad retainer allows fast pad changes 
• Calipers are finished in durable gloss red or gloss black powder coat
• Rear kits include Wilwood’s MC4 mechanical parking brake in left and right-hand configuration, plus the needed cable kit

Rotors: Spec37 Plain or SRP Drilled & Slotted

• Larger and thicker vented rotors provide greater brake torque and resist thermal distortion with curved vanes that circulate cooling air
• Both front and rear rotors are 289mm x 20mm (11.38”x0.81”) premium proprietary Spec37 iron alloy rotors with 36 curved vanes
• Both front and rear rotors are available in a precision plain face or SRP drilled and slotted patter

Brake Pads: BP-10

• BP-10 street performance pads provide smooth and consistent response with long wear over a broad range of temperatures

Installation Parts:

• Kits include caliper brackets, Flexlines and premium grade installation hardware

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

140-17475

The product you are viewing cross references to these numbers

Wilwood front brake caliper and rotor kit - Powerlite PL4R radial mount calipers with Vented, Drilled and Slotted Discs. 

Min Wheel Diameter Required: 15 inch
Spindle Type Used: Factory Disc Spindle
Mount Type: Radial
Caliper Type: 4 piston - Powder Coated
Rotor Size: 11.38 x 0.81 inches (289mm x 20mm)

Fits:
Porsche 914/4 - 1973 to 1976

Rigid Powerlite PL4R Front Brake Kit using OE hubs

Many of the Porsche 914 sports cars that continue to be driven today are now modified with more power than the original VW flat four-cylinder engine. With that added power comes the need to upgrade the braking system and Wilwood Disc Brakes has the perfect solution.
New front brake kits are now available for 1970-76 Porsche 914/4 when used with a 914/6 or 911, 19mm master cylinder. 

Kits include forged aluminum Powerlite four piston calipers, brackets and hubs, combined with larger plain face or SRP drilled and slotted vented rotors. Wilwood’s upgraded brake kits weigh substantially less than the smaller, unvented factory brakes with iron calipers and will help with the power and performance of your Porsche 914

Kit Features:

• Forged aluminum calipers are lighter and stiffer than cast iron and have been proven over decades in countless road races, rally and off-road competitions
• Aluminum mounting rotor adapters, brackets and hubs make the kits substantially lighter than stock while increasing braking performance and stamina
• Wheel studs are included with the front kits (user to supply correct lug nuts for wheels being used)
• Rigid Powerlite four piston radial-mount calipers are engineered to improve braking performance and feature pistons size

Calipers: Powerlite PL4R

• Rigid Powerlite four piston radial-mount calipers are engineered to improve braking performance and feature pistons sized to maintain the 914’s proper front-to-rear brake bias
• Caliper profile allows fitment in many small diameter wheels and quick-clip top pad retainer allows fast pad changes 
• Calipers are finished in durable gloss red or gloss black powder coat
• Rear kits include Wilwood’s MC4 mechanical parking brake in left and right-hand configuration, plus the needed cable kit

Rotors: Spec37 Plain or SRP Drilled & Slotted

• Larger and thicker vented rotors provide greater brake torque and resist thermal distortion with curved vanes that circulate cooling air
• Both front and rear rotors are 289mm x 20mm (11.38”x0.81”) premium proprietary Spec37 iron alloy rotors with 36 curved vanes
• Both front and rear rotors are available in a precision plain face or SRP drilled and slotted patter

Brake Pads: BP-10

• BP-10 street performance pads provide smooth and consistent response with long wear over a broad range of temperatures

Installation Parts:

• Kits include caliper brackets, Flexlines and premium grade installation hardware

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

140-17474-D

The product you are viewing cross references to these numbers

Wilwood front brake caliper and rotor kit - Powerlite PL4R radial mount calipers with Vented, Plain Discs. 

Min Wheel Diameter Required: 15 inch
Spindle Type Used: Factory Disc Spindle
Mount Type: Radial
Caliper Type: 4 piston - Powder Coated
Rotor Size: 11.38 x 0.81 inches (289mm x 20mm)

Fits:
Porsche 914/4 - 1973 to 1976

Rigid Powerlite PL4R Front Brake Kit using OE hubs

Many of the Porsche 914 sports cars that continue to be driven today are now modified with more power than the original VW flat four-cylinder engine. With that added power comes the need to upgrade the braking system and Wilwood Disc Brakes has the perfect solution.
New front brake kits are now available for 1970-76 Porsche 914/4 when used with a 914/6 or 911, 19mm master cylinder. 

Kits include forged aluminum Powerlite four piston calipers, brackets and hubs, combined with larger plain face or SRP drilled and slotted vented rotors. Wilwood’s upgraded brake kits weigh substantially less than the smaller, unvented factory brakes with iron calipers and will help with the power and performance of your Porsche 914

Kit Features:

• Forged aluminum calipers are lighter and stiffer than cast iron and have been proven over decades in countless road races, rally and off-road competitions
• Aluminum mounting rotor adapters, brackets and hubs make the kits substantially lighter than stock while increasing braking performance and stamina
• Wheel studs are included with the front kits (user to supply correct lug nuts for wheels being used)
• Rigid Powerlite four piston radial-mount calipers are engineered to improve braking performance and feature pistons size

Calipers: Powerlite PL4R

• Rigid Powerlite four piston radial-mount calipers are engineered to improve braking performance and feature pistons sized to maintain the 914’s proper front-to-rear brake bias
• Caliper profile allows fitment in many small diameter wheels and quick-clip top pad retainer allows fast pad changes 
• Calipers are finished in durable gloss red or gloss black powder coat
• Rear kits include Wilwood’s MC4 mechanical parking brake in left and right-hand configuration, plus the needed cable kit

Rotors: Spec37 Plain or SRP Drilled & Slotted

• Larger and thicker vented rotors provide greater brake torque and resist thermal distortion with curved vanes that circulate cooling air
• Both front and rear rotors are 289mm x 20mm (11.38”x0.81”) premium proprietary Spec37 iron alloy rotors with 36 curved vanes
• Both front and rear rotors are available in a precision plain face or SRP drilled and slotted patter

Brake Pads: BP-10

• BP-10 street performance pads provide smooth and consistent response with long wear over a broad range of temperatures

Installation Parts:

• Kits include caliper brackets, Flexlines and premium grade installation hardware

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

140-17474

The product you are viewing cross references to these numbers

Wilwood front brake caliper and rotor kit - Powerlite PL4R radial mount calipers with Vented, Drilled and Slotted Discs. 

Min Wheel Diameter Required: 15 inch
Spindle Type Used: Factory Disc Spindle
Mount Type: Radial
Caliper Type: 4 piston - Powder Coated
Rotor Size: 11.38 x 0.81 inches (289mm x 20mm)

Fits:
Porsche 914/4 - 1970 to 1972

Rigid Powerlite PL4R Front Brake Kit using OE hubs

Many of the Porsche 914 sports cars that continue to be driven today are now modified with more power than the original VW flat four-cylinder engine. With that added power comes the need to upgrade the braking system and Wilwood Disc Brakes has the perfect solution.
New front brake kits are now available for 1970-76 Porsche 914/4 when used with a 914/6 or 911, 19mm master cylinder. 

Kits include forged aluminum Powerlite four piston calipers, brackets and hubs, combined with larger plain face or SRP drilled and slotted vented rotors. Wilwood’s upgraded brake kits weigh substantially less than the smaller, unvented factory brakes with iron calipers and will help with the power and performance of your Porsche 914

Kit Features:

• Forged aluminum calipers are lighter and stiffer than cast iron and have been proven over decades in countless road races, rally and off-road competitions
• Aluminum mounting rotor adapters, brackets and hubs make the kits substantially lighter than stock while increasing braking performance and stamina
• Wheel studs are included with the front kits (user to supply correct lug nuts for wheels being used)
• Rigid Powerlite four piston radial-mount calipers are engineered to improve braking performance and feature pistons size

Calipers: Powerlite PL4R

• Rigid Powerlite four piston radial-mount calipers are engineered to improve braking performance and feature pistons sized to maintain the 914’s proper front-to-rear brake bias
• Caliper profile allows fitment in many small diameter wheels and quick-clip top pad retainer allows fast pad changes 
• Calipers are finished in durable gloss red or gloss black powder coat
• Rear kits include Wilwood’s MC4 mechanical parking brake in left and right-hand configuration, plus the needed cable kit

Rotors: Spec37 Plain or SRP Drilled & Slotted

• Larger and thicker vented rotors provide greater brake torque and resist thermal distortion with curved vanes that circulate cooling air
• Both front and rear rotors are 289mm x 20mm (11.38”x0.81”) premium proprietary Spec37 iron alloy rotors with 36 curved vanes
• Both front and rear rotors are available in a precision plain face or SRP drilled and slotted patter

Brake Pads: BP-10

• BP-10 street performance pads provide smooth and consistent response with long wear over a broad range of temperatures

Installation Parts:

• Kits include caliper brackets, Flexlines and premium grade installation hardware

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

140-17473

The product you are viewing cross references to these numbers

Wilwood front brake caliper and rotor kit - Powerlite PL4R radial mount calipers with Vented, Plain Discs. 

Min Wheel Diameter Required: 15 inch
Spindle Type Used: Factory Disc Spindle
Mount Type: Radial
Caliper Type: 4 piston - Powder Coated
Rotor Size: 11.38 x 0.81 inches (289mm x 20mm)

Fits:
Porsche 914/4 - 1970 to 1972

Rigid Powerlite PL4R Front Brake Kit using OE hubs

Many of the Porsche 914 sports cars that continue to be driven today are now modified with more power than the original VW flat four-cylinder engine. With that added power comes the need to upgrade the braking system and Wilwood Disc Brakes has the perfect solution.
New front brake kits are now available for 1970-76 Porsche 914/4 when used with a 914/6 or 911, 19mm master cylinder. 

Kits include forged aluminum Powerlite four piston calipers, brackets and hubs, combined with larger plain face or SRP drilled and slotted vented rotors. Wilwood’s upgraded brake kits weigh substantially less than the smaller, unvented factory brakes with iron calipers and will help with the power and performance of your Porsche 914

Kit Features:

• Forged aluminum calipers are lighter and stiffer than cast iron and have been proven over decades in countless road races, rally and off-road competitions
• Aluminum mounting rotor adapters, brackets and hubs make the kits substantially lighter than stock while increasing braking performance and stamina
• Wheel studs are included with the front kits (user to supply correct lug nuts for wheels being used)
• Rigid Powerlite four piston radial-mount calipers are engineered to improve braking performance and feature pistons size

Calipers: Powerlite PL4R

• Rigid Powerlite four piston radial-mount calipers are engineered to improve braking performance and feature pistons sized to maintain the 914’s proper front-to-rear brake bias
• Caliper profile allows fitment in many small diameter wheels and quick-clip top pad retainer allows fast pad changes 
• Calipers are finished in durable gloss red or gloss black powder coat
• Rear kits include Wilwood’s MC4 mechanical parking brake in left and right-hand configuration, plus the needed cable kit

Rotors: Spec37 Plain or SRP Drilled & Slotted

• Larger and thicker vented rotors provide greater brake torque and resist thermal distortion with curved vanes that circulate cooling air
• Both front and rear rotors are 289mm x 20mm (11.38”x0.81”) premium proprietary Spec37 iron alloy rotors with 36 curved vanes
• Both front and rear rotors are available in a precision plain face or SRP drilled and slotted patter

Brake Pads: BP-10

• BP-10 street performance pads provide smooth and consistent response with long wear over a broad range of temperatures

Installation Parts:

• Kits include caliper brackets, Flexlines and premium grade installation hardware

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

140-17473

The product you are viewing cross references to these numbers

Wilwood rear brake caliper and rotor kit - Dynapro-P radial mount calipers with Brake Pads. 
For brake caliper mounting bolt spacing of 3.5 inches (88.9mm)

Min Wheel Diameter Required: 15 inch
Caliper Mounting Bolt Spacing: 3.5 inch (88.9mm)
Mount Type: Radial
Caliper Type: 4 piston - Powder Coated

Fits:
Porsche 911 3.2 Carrera - 1984 to 1989

Narrow Dynapro-P Radial Rear Brake Caliper Kit

Forged Narrow Dynapro Radial caliper, pad, rotor and bracket kits are engineered as high performance street and race for 1969-1983 Porsche 911's with 3.50" caliper mounts. These kits combine the high-tech styling and superior performance of the NDPR-P calipers and the positive response, long wear, high fade resistance, and easy clean properties of the BP-10 compound Smart Pads. Kits include plain face or SRP drilled one piece rotors made from proprietary alloys. These kits bolt directly to the front strut without the need for additional brackets or adapters. Braided stainless flexlines are included.

Wilwood Narrow DynaPro four piston radial mount calipers combine the versatility of radial mounting with a sleek profile, superior strength and extreme durability in adverse conditions. With an overall weight as light as 3.58 pounds, the DynaPro has become a favored choice for a broad range of sports, rally, and off-road driving applications.

Kit Features:

• Compatible with factory master cylinder

Brake Pads: BP-10

• BP-10 street performance pads 

Installation Parts:

• Caliper brackets, stainless steel Flexlines and all premium-grade hardware for installation are included

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

140-16678

The product you are viewing cross references to these numbers

Wilwood rear brake caliper and rotor kit - Dynapro-P radial mount calipers with Brake Pads. 
For brake caliper mounting bolt spacing of 3.5 inches (88.9mm)

Min Wheel Diameter Required: 15 inch
Caliper Mounting Bolt Spacing: 3.5 inch (88.9mm)
Mount Type: Radial
Caliper Type: 4 piston - Powder Coated

Fits:
Porsche 911 - 1969 to 1983

Narrow Dynapro-P Radial Rear Brake Caliper Kit

Forged Narrow Dynapro Radial caliper, pad, rotor and bracket kits are engineered as high performance street and race for 1969-1983 Porsche 911's with 3.50" caliper mounts. These kits combine the high-tech styling and superior performance of the NDPR-P calipers and the positive response, long wear, high fade resistance, and easy clean properties of the BP-10 compound Smart Pads. Kits include plain face or SRP drilled one piece rotors made from proprietary alloys. These kits bolt directly to the front strut without the need for additional brackets or adapters. Braided stainless flexlines are included.

Wilwood Narrow DynaPro four piston radial mount calipers combine the versatility of radial mounting with a sleek profile, superior strength and extreme durability in adverse conditions. With an overall weight as light as 3.58 pounds, the DynaPro has become a favored choice for a broad range of sports, rally, and off-road driving applications.

Kit Features:

• Compatible with factory master cylinder

Brake Pads: BP-10

• BP-10 street performance pads 

Installation Parts:

• Caliper brackets, stainless steel Flexlines and all premium-grade hardware for installation are included

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

140-16676

The product you are viewing cross references to these numbers

Wilwood rear brake caliper and rotor kit - Dynapro-P radial mount calipers with Vented and Slotted Discs. 
For brake caliper mounting bolt spacing of 3.5 inches (88.9mm)

Min Wheel Diameter Required: 15 inch
Caliper Mounting Bolt Spacing: 3.5 inch (88.9mm)
Mount Type: Radial
Caliper Type: 4 piston - Powder Coated
Rotor Size: 11.42 x 0.95 inches

Fits:
Porsche 911 3.2 Carrera - 1984 to 1989

Narrow Dynapro-P Radial Rear Brake Kit

Forged Narrow Dynapro Radial caliper, pad, rotor and bracket kits are engineered as high performance street and race for 1969-1983 Porsche 911's with 3.50" caliper mounts. These kits combine the high-tech styling and superior performance of the NDPR-P calipers and the positive response, long wear, high fade resistance, and easy clean properties of the BP-10 compound Smart Pads. Kits include plain face or SRP drilled one piece rotors made from proprietary alloys. These kits bolt directly to the front strut without the need for additional brackets or adapters. Braided stainless flexlines are included.

Wilwood Narrow DynaPro four piston radial mount calipers combine the versatility of radial mounting with a sleek profile, superior strength and extreme durability in adverse conditions. With an overall weight as light as 3.58 pounds, the DynaPro has become a favored choice for a broad range of sports, rally, and off-road driving applications.

Kit Features:

• Calipers continuously refined through modern engineering and manufacturing methods, including FEA (Finite Element Analysis)
• Compatible with factory master cylinder

Rotors: Plain OR SRP Drilled and Slotted

• Vented rotors in plain face, or SRP drilled and slotted with black E-coat applied 

Brake Pads: BP-10

• BP-10 street performance pads 

Installation Parts:

• Caliper brackets, stainless steel Flexlines and all premium-grade hardware for installation are included

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

140-17003

The product you are viewing cross references to these numbers

Wilwood rear brake caliper and rotor kit - Dynapro-P radial mount calipers with Vented, Drilled and Slotted Discs. 
For brake caliper mounting bolt spacing of 3.5 inches (88.9mm)

Min Wheel Diameter Required: 15 inch
Caliper Mounting Bolt Spacing: 3.5 inch (88.9mm)
Mount Type: Radial
Caliper Type: 4 piston - Powder Coated
Rotor Size: 11.42 x 0.95 inches

Fits:
Porsche 911 3.2 Carrera - 1984 to 1989

Narrow Dynapro-P Radial Rear Brake Kit

Forged Narrow Dynapro Radial caliper, pad, rotor and bracket kits are engineered as high performance street and race for 1969-1983 Porsche 911's with 3.50" caliper mounts. These kits combine the high-tech styling and superior performance of the NDPR-P calipers and the positive response, long wear, high fade resistance, and easy clean properties of the BP-10 compound Smart Pads. Kits include plain face or SRP drilled one piece rotors made from proprietary alloys. These kits bolt directly to the front strut without the need for additional brackets or adapters. Braided stainless flexlines are included.

Wilwood Narrow DynaPro four piston radial mount calipers combine the versatility of radial mounting with a sleek profile, superior strength and extreme durability in adverse conditions. With an overall weight as light as 3.58 pounds, the DynaPro has become a favored choice for a broad range of sports, rally, and off-road driving applications.

Kit Features:

• Calipers continuously refined through modern engineering and manufacturing methods, including FEA (Finite Element Analysis)
• Compatible with factory master cylinder

Rotors: Plain OR SRP Drilled and Slotted

• Vented rotors in plain face, or SRP drilled and slotted with black E-coat applied 

Brake Pads: BP-10

• BP-10 street performance pads 

Installation Parts:

• Caliper brackets, stainless steel Flexlines and all premium-grade hardware for installation are included

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

140-1668

The product you are viewing cross references to these numbers

Wilwood rear brake caliper and rotor kit - Dynapro-P radial mount calipers with Vented, Plain Discs. 
For brake caliper mounting bolt spacing of 3.5 inches (88.9mm)

Min Wheel Diameter Required: 15 inch
Caliper Mounting Bolt Spacing: 3.5 inch (88.9mm)
Mount Type: Radial
Caliper Type: 4 piston - Powder Coated
Rotor Size: 11.42 x 0.80 inches

Fits:
Porsche 911 3.2 Carrera - 1984 to 1989

Narrow Dynapro-P Radial Rear Brake Kit

Forged Narrow Dynapro Radial caliper, pad, rotor and bracket kits are engineered as high performance street and race for 1969-1983 Porsche 911's with 3.50" caliper mounts. These kits combine the high-tech styling and superior performance of the NDPR-P calipers and the positive response, long wear, high fade resistance, and easy clean properties of the BP-10 compound Smart Pads. Kits include plain face or SRP drilled one piece rotors made from proprietary alloys. These kits bolt directly to the front strut without the need for additional brackets or adapters. Braided stainless flexlines are included.

Wilwood Narrow DynaPro four piston radial mount calipers combine the versatility of radial mounting with a sleek profile, superior strength and extreme durability in adverse conditions. With an overall weight as light as 3.58 pounds, the DynaPro has become a favored choice for a broad range of sports, rally, and off-road driving applications.

Kit Features:

• Calipers continuously refined through modern engineering and manufacturing methods, including FEA (Finite Element Analysis)
• Compatible with factory master cylinder

Rotors: Plain OR SRP Drilled and Slotted

• Vented rotors in plain face, or SRP drilled and slotted with black E-coat applied 

Brake Pads: BP-10

• BP-10 street performance pads 

Installation Parts:

• Caliper brackets, stainless steel Flexlines and all premium-grade hardware for installation are included

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

140-1668

The product you are viewing cross references to these numbers

Wilwood rear brake caliper and rotor kit - Dynapro-P radial mount calipers with Vented and Slotted Discs. 
For brake caliper mounting bolt spacing of 3.5 inches (88.9mm)

Min Wheel Diameter Required: 15 inch
Caliper Mounting Bolt Spacing: 3.5 inch (88.9mm)
Mount Type: Radial
Caliper Type: 4 piston - Powder Coated
Rotor Size: 11.42 x 0.80 inches

Fits:
Porsche 911 - 1969 to 1983

Narrow Dynapro-P Radial Rear Brake Kit

Forged Narrow Dynapro Radial caliper, pad, rotor and bracket kits are engineered as high performance street and race for 1969-1983 Porsche 911's with 3.50" caliper mounts. These kits combine the high-tech styling and superior performance of the NDPR-P calipers and the positive response, long wear, high fade resistance, and easy clean properties of the BP-10 compound Smart Pads. Kits include plain face or SRP drilled one piece rotors made from proprietary alloys. These kits bolt directly to the front strut without the need for additional brackets or adapters. Braided stainless flexlines are included.

Wilwood Narrow DynaPro four piston radial mount calipers combine the versatility of radial mounting with a sleek profile, superior strength and extreme durability in adverse conditions. With an overall weight as light as 3.58 pounds, the DynaPro has become a favored choice for a broad range of sports, rally, and off-road driving applications.

Kit Features:

• Calipers continuously refined through modern engineering and manufacturing methods, including FEA (Finite Element Analysis)
• Compatible with factory master cylinder

Rotors: Plain OR SRP Drilled and Slotted

• Vented rotors in plain face, or SRP drilled and slotted with black E-coat applied 

Brake Pads: BP-10

• BP-10 street performance pads 

Installation Parts:

• Caliper brackets, stainless steel Flexlines and all premium-grade hardware for installation are included

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

140-17002

The product you are viewing cross references to these numbers

Wilwood rear brake caliper and rotor kit - Dynapro-P radial mount calipers with Vented, Drilled and Slotted Discs. 
For brake caliper mounting bolt spacing of 3.5 inches (88.9mm)

Min Wheel Diameter Required: 15 inch
Caliper Mounting Bolt Spacing: 3.5 inch (88.9mm)
Mount Type: Radial
Caliper Type: 4 piston - Powder Coated
Rotor Size: 11.42 x 0.80 inches

Fits:
Porsche 911 - 1969 to 1983

Narrow Dynapro-P Radial Rear Brake Kit

Forged Narrow Dynapro Radial caliper, pad, rotor and bracket kits are engineered as high performance street and race for 1969-1983 Porsche 911's with 3.50" caliper mounts. These kits combine the high-tech styling and superior performance of the NDPR-P calipers and the positive response, long wear, high fade resistance, and easy clean properties of the BP-10 compound Smart Pads. Kits include plain face or SRP drilled one piece rotors made from proprietary alloys. These kits bolt directly to the front strut without the need for additional brackets or adapters. Braided stainless flexlines are included.

Wilwood Narrow DynaPro four piston radial mount calipers combine the versatility of radial mounting with a sleek profile, superior strength and extreme durability in adverse conditions. With an overall weight as light as 3.58 pounds, the DynaPro has become a favored choice for a broad range of sports, rally, and off-road driving applications.

Kit Features:

• Calipers continuously refined through modern engineering and manufacturing methods, including FEA (Finite Element Analysis)
• Compatible with factory master cylinder

Rotors: Plain OR SRP Drilled and Slotted

• Vented rotors in plain face, or SRP drilled and slotted with black E-coat applied 

Brake Pads: BP-10

• BP-10 street performance pads 

Installation Parts:

• Caliper brackets, stainless steel Flexlines and all premium-grade hardware for installation are included

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

140-1668

The product you are viewing cross references to these numbers

Wilwood rear brake caliper and rotor kit - Dynapro-P radial mount calipers with Vented, Plain Discs. 
For brake caliper mounting bolt spacing of 3.5 inches (88.9mm)

Min Wheel Diameter Required: 15 inch
Caliper Mounting Bolt Spacing: 3.5 inch (88.9mm)
Mount Type: Radial
Caliper Type: 4 piston - Powder Coated
Rotor Size: 11.42 x 0.80 inches

Fits:
Porsche 911 - 1969 to 1983

Narrow Dynapro-P Radial Rear Brake Kit

Forged Narrow Dynapro Radial caliper, pad, rotor and bracket kits are engineered as high performance street and race for 1969-1983 Porsche 911's with 3.50" caliper mounts. These kits combine the high-tech styling and superior performance of the NDPR-P calipers and the positive response, long wear, high fade resistance, and easy clean properties of the BP-10 compound Smart Pads. Kits include plain face or SRP drilled one piece rotors made from proprietary alloys. These kits bolt directly to the front strut without the need for additional brackets or adapters. Braided stainless flexlines are included.

Wilwood Narrow DynaPro four piston radial mount calipers combine the versatility of radial mounting with a sleek profile, superior strength and extreme durability in adverse conditions. With an overall weight as light as 3.58 pounds, the DynaPro has become a favored choice for a broad range of sports, rally, and off-road driving applications.

Kit Features:

• Calipers continuously refined through modern engineering and manufacturing methods, including FEA (Finite Element Analysis)
• Compatible with factory master cylinder

Rotors: Plain OR SRP Drilled and Slotted

• Vented rotors in plain face, or SRP drilled and slotted with black E-coat applied 

Brake Pads: BP-10

• BP-10 street performance pads 

Installation Parts:

• Caliper brackets, stainless steel Flexlines and all premium-grade hardware for installation are included

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

140-1668

The product you are viewing cross references to these numbers

Wilwood front brake caliper and brake pad kit - Powerlite PL4R radial mount calipers. 
For early struts with brake caliper mounting bolt spacing of 3.0 inches (76.2mm)

Min Wheel Diameter Required: 15 inch
Caliper Mounting Bolt Spacing: 3.0 inch (76.2mm)
Spindle Type Used: Factory Disc Spindle
Mount Type: Radial
Caliper Type: 4 piston - Powder Coated

Fits:
Porsche 911 - 1969 to 1973

POWERLITE Front Brake Caliper Kits using OE Hubs and Rotors

Wilwood’s motorsports-proven Powerlite four piston calipers provide the foundation for a complete brake kit package for classic 1969-74 Porsche 911s using OE hubs.  Complete brake kits include brackets for bolt-on mounting to struts with 3.0” (76,2mm) mounting tabs, rotors, stainless steel Flexlines and brake pads. Caliper-only kits include brackets for 3.0” mounting tabs, Flexlines, and brake pads.

Kit Features:

• Calipers continuously refined through modern engineering and manufacturing methods, including FEA (Finite Element Analysis)
• Compatible with factory master cylinder

Calipers: POWERLITE PL4R

• Rigid, forged aluminum radial mount four piston calipers
• Quick-clip top pad retainer allows faster pad changes and fits inside smaller diameter wheels
• One-piece stainless steel pistons slow heat transfer and resist corrosion 
• Calipers are finished in gloss Le Mans yellow, black or red powder coat, over durable wear-resistant Type-III hard anodized coating

Brake Pads: BP-10

• BP-10 street performance pads 

Installation Parts:

• Caliper brackets, stainless steel Flexlines and all premium-grade hardware for installation are included

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

140-17019

The product you are viewing cross references to these numbers

Wilwood front brake caliper and rotor kit - Powerlite PL4R radial mount calipers with Vented, Drilled and Slotted Discs. 
For early struts with brake caliper mounting bolt spacing of 3.0 inches (76.2mm)

Min Wheel Diameter Required: 15 inch
Caliper Mounting Bolt Spacing: 3.0 inch (76.2mm)
Spindle Type Used: Factory Disc Spindle
Mount Type: Radial
Caliper Type: 4 piston - Powder Coated
Rotor Size: 11.10 x 0.8 inches (282mm x 20mm)

Fits:
Porsche 911 - 1969 to 1973

POWERLITE Front Brake Kits for using OE Hubs

Wilwood’s motorsports-proven Powerlite four piston calipers provide the foundation for a complete brake kit package for classic 1969-74 Porsche 911s using OE hubs.  Complete brake kits include brackets for bolt-on mounting to struts with 3.0” (76,2mm) mounting tabs, rotors, stainless steel Flexlines and brake pads. Caliper-only kits include brackets for 3.0” mounting tabs, Flexlines, and brake pads.

Kit Features:

• Calipers continuously refined through modern engineering and manufacturing methods, including FEA (Finite Element Analysis)
• Compatible with factory master cylinder

Calipers: POWERLITE PL4R

• Rigid, forged aluminum radial mount four piston calipers
• Quick-clip top pad retainer allows faster pad changes and fits inside smaller diameter wheels
• One-piece stainless steel pistons slow heat transfer and resist corrosion 
• Calipers are finished in gloss Le Mans yellow, black or red powder coat, over durable wear-resistant Type-III hard anodized coating

Rotors: Plain OR SRP Drilled and Slotted

• Vented rotors in plain face, or SRP drilled and slotted with black E-coat applied
• 11.10” x .80” (282 x 20mm) for use with OE hubs 

Brake Pads: BP-10

• BP-10 street performance pads 

Installation Parts:

• Caliper brackets, stainless steel Flexlines and all premium-grade hardware for installation are included

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

140-16946-D

The product you are viewing cross references to these numbers

Wilwood front brake caliper and rotor kit - Powerlite PL4R radial mount calipers with Vented, Plain Discs. 
For early struts with brake caliper mounting bolt spacing of 3.0 inches (76.2mm)

Min Wheel Diameter Required: 15 inch
Caliper Mounting Bolt Spacing: 3.0 inch (76.2mm)
Spindle Type Used: Factory Disc Spindle
Mount Type: Radial
Caliper Type: 4 piston - Powder Coated
Rotor Size: 11.10 x 0.8 inches (282mm x 20mm)

Fits:
Porsche 911 - 1969 to 1973

POWERLITE Front Brake Kits for using OE Hubs

Wilwood’s motorsports-proven Powerlite four piston calipers provide the foundation for a complete brake kit package for classic 1969-74 Porsche 911s using OE hubs.  Complete brake kits include brackets for bolt-on mounting to struts with 3.0” (76,2mm) mounting tabs, rotors, stainless steel Flexlines and brake pads. Caliper-only kits include brackets for 3.0” mounting tabs, Flexlines, and brake pads.

Kit Features:

• Calipers continuously refined through modern engineering and manufacturing methods, including FEA (Finite Element Analysis)
• Compatible with factory master cylinder

Calipers: POWERLITE PL4R

• Rigid, forged aluminum radial mount four piston calipers
• Quick-clip top pad retainer allows faster pad changes and fits inside smaller diameter wheels
• One-piece stainless steel pistons slow heat transfer and resist corrosion 
• Calipers are finished in gloss Le Mans yellow, black or red powder coat, over durable wear-resistant Type-III hard anodized coating

Rotors: Plain OR SRP Drilled and Slotted

• Vented rotors in plain face, or SRP drilled and slotted with black E-coat applied
• 11.10” x .80” (282 x 20mm) for use with OE hubs 

Brake Pads: BP-10

• BP-10 street performance pads 

Installation Parts:

• Caliper brackets, stainless steel Flexlines and all premium-grade hardware for installation are included

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

140-16946

The product you are viewing cross references to these numbers

Wilwood front brake caliper and rotor kit - Superlite radial mount calipers with Vented, Drilled and Slotted Discs. 
For later struts with brake caliper mounting bolt spacing of 3.5 inches (88.9mm)

Min Wheel Diameter Required: 15 inch
Caliper Mounting Bolt Spacing: 3.5 inch (88.9mm)
Spindle Type Used: Factory Disc Spindle
Mount Type: Radial
Caliper Type: 4 piston - Powder Coated
Rotor Diameter: 12.19 x 0.95 inches

Fits:
Porsche 911 - 1969 to 1989

Forged Narrow Superlite 4R Front Brake Kit using OE hubs

Motorsports-proven Forged Narrow Superlite Radial mount caliper, with oversize rotor are engineered to bring 1969-89 Porsche 911s performance braking capability on par with the 1974 RS and 930 turbo, using lightweight components and modern USA manufacturing techniques. These kits combine the latest Superlite four piston caliper, used in countless laps of many competition classes, with 12.19” (310mm) diameter GT slotted or SRP series drilled and slotted e-coat rotors, and the positive response, high fade resistance, and easy clean properties of the BP-10 compound Smart Pads. Forged aluminum calipers, mounting hats, and bracket outperform stock parts while weighing less. These kits bolt directly to front struts with 3.00” (76.2mm) spaced mounting tabs without modification. Braided stainless Flexlines are included.

Wilwood engineered these big brake kits around the motorsports proven Superlite calipers for the classic 1969-89 Porsche 911. Larger 310mm (12.19”) iron alloy rotors with forged aluminum mounting hats and Wilwood brackets produce greater brake torque and less fade, while weighing substantially less than OE.
These rigid, forged billet aluminum four piston calipers upgrade the stock 911 to a spec similar to the 1974 RS or 930 turbo, with the added advantage of decades of material, design and manufacturing advancements. Kits are available for both 3.0” (76,2mm) and 3.5” (88,9mm) mounting tabs.

Kit Features:

• Superlite front calipers have been proven in countless road race, circle track and off-road competition classes. These have evolved over decades and been refined through millions of laps.
• Direct bolt-on upgrade for 1969-89 Porsche 911 with no permanent modifications
• Designed to work with OEM master cylinders and rear brakes to maintain proper front to rear brake bias
  
  

Calipers: SUPERLITE FNSL4R

• Stress-flow forged aluminum calipers with stainless steel pistons for strength and durability
• Offered in gloss Le Mans yellow, black or red powder coat over durable wear-resistant Type-III hard anodized coating
  
  

Rotors: Plain OR SRP Drilled and Slotted

• Big 310mm (12.19”) x 28mm (1.10”) vented rotors for greater brake torque and more thermal capacity (28mm/1.10” larger than OE)
• Precision-machined, low-distortion proprietary iron alloy rotors with 32 cooling vanes, mounted to forged aluminum hats
• Rotors offered with GT slotted, or SRP drilled and slotted faces
  
  

Brake Pads: BP-10

• High-performance street BP-10 brake pads 
  
  

Installation Parts:

• Kits include brackets, stainless flexlines, fittings Drilledand hardware
• Part numbers available to fit 3.0” (76,2mm) and 3.5” (88,9mm) spaced front strut mounting tab

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

140-16947-D

The product you are viewing cross references to these numbers

Wheel cap GT4, Platinum satin-matt for 20" Cayman GT4 wheel, 20" wheel 982 Spyder/GT4

Sold each.



Fits:
Porsche 981 Cayman GT4 2016
Porsche 718 Cayman GT4 2019>>

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9P2601147OB5

The product you are viewing cross references to these numbers

Wilwood front brake caliper and rotor kit - Superlite radial mount calipers with Vented, Slotted Discs. 
For later struts with brake caliper mounting bolt spacing of 3.5 inches (88.9mm)

Min Wheel Diameter Required: 15 inch
Caliper Mounting Bolt Spacing: 3.5 inch (88.9mm)
Spindle Type Used: Factory Disc Spindle
Mount Type: Radial
Caliper Type: 4 piston - Powder Coated
Rotor Diameter: 12.19 x 0.95 inches

Fits:
Porsche 911 - 1969 to 1989

Forged Narrow Superlite 4R Front Brake Kit using OE hubs

Motorsports-proven Forged Narrow Superlite Radial mount caliper, with oversize rotor are engineered to bring 1969-89 Porsche 911s performance braking capability on par with the 1974 RS and 930 turbo, using lightweight components and modern USA manufacturing techniques. These kits combine the latest Superlite four piston caliper, used in countless laps of many competition classes, with 12.19” (310mm) diameter GT slotted or SRP series drilled and slotted e-coat rotors, and the positive response, high fade resistance, and easy clean properties of the BP-10 compound Smart Pads. Forged aluminum calipers, mounting hats, and bracket outperform stock parts while weighing less. These kits bolt directly to front struts with 3.00” (76.2mm) spaced mounting tabs without modification. Braided stainless Flexlines are included.

Wilwood engineered these big brake kits around the motorsports proven Superlite calipers for the classic 1969-89 Porsche 911. Larger 310mm (12.19”) iron alloy rotors with forged aluminum mounting hats and Wilwood brackets produce greater brake torque and less fade, while weighing substantially less than OE.
These rigid, forged billet aluminum four piston calipers upgrade the stock 911 to a spec similar to the 1974 RS or 930 turbo, with the added advantage of decades of material, design and manufacturing advancements. Kits are available for both 3.0” (76,2mm) and 3.5” (88,9mm) mounting tabs.

Kit Features:

• Superlite front calipers have been proven in countless road race, circle track and off-road competition classes. These have evolved over decades and been refined through millions of laps.
• Direct bolt-on upgrade for 1969-89 Porsche 911 with no permanent modifications
• Designed to work with OEM master cylinders and rear brakes to maintain proper front to rear brake bias
  
  

Calipers: SUPERLITE FNSL4R

• Stress-flow forged aluminum calipers with stainless steel pistons for strength and durability
• Offered in gloss Le Mans yellow, black or red powder coat over durable wear-resistant Type-III hard anodized coating
  
  

Rotors: Plain OR SRP Drilled and Slotted

• Big 310mm (12.19”) x 28mm (1.10”) vented rotors for greater brake torque and more thermal capacity (28mm/1.10” larger than OE)
• Precision-machined, low-distortion proprietary iron alloy rotors with 32 cooling vanes, mounted to forged aluminum hats
• Rotors offered with GT slotted, or SRP drilled and slotted faces
  
  

Brake Pads: BP-10

• High-performance street BP-10 brake pads 
  
  

Installation Parts:

• Kits include brackets, stainless flexlines, fittings Drilledand hardware
• Part numbers available to fit 3.0” (76,2mm) and 3.5” (88,9mm) spaced front strut mounting tab

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

140-16947

The product you are viewing cross references to these numbers