|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
300 ohm, #18, 19 strand copper clad steel ladder line, PE jacket
|
Nickel (UHF) & Gold (SMA) Plated Brass Body, Nickel (UHF) & Gold (SMA) Plated Brass Center Pin, Delrin (UHF) & PTFE (SMA) Dielectric, “D/TN/GN/G”
|
250FT - RG-8X type, 16 AWG stranded (19x29) .058" bare copper conductor, gas-injected FPE insulation, bare copper braid shield (95% coverage), PVC jacket.
|
This LMR-195 UF coax cable can be used in almost any application where handling characteristics, improved shield and low loss is required.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(8) Pack Amphenol PL-259 Connector Kit. Included are (8) 2 in. Pieces of our 1/2" Adhesive Heat Shrink Tubing (3:1 Shrink ratio) at no additional cost. Cable Type: RG-8, RG-10, RG-213, RG-225 - Shell: Brass plated with Nickel, Body: Brass plated with Silver. Contact pin:
|
Break Strength 770 Lbs. Double braided, polyester (AKA Dacron). UV, mildew, rot and stretch resistant low coefficient of friction & high resistance to abrasion.
|
The LMR-600UF 1/2 inch Ultra flex cable is super flexible due to its stranded center conductor. It has a tinned copper outer conductor that is taped and has a UV-resistant polyethylene jacket for outdoor use.
|
RF-9913, 50 ohms, PVC-I 0.405" Jacket, Air Dielectric spiral wrapped PE, #9.5 Conductor, 88% braid plus 100% foil Shield, 84% Velocity of Propagation, and a Capacitance of 24.0 pf/ft.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The LMR-400 assembly low loss braided coaxial cable. The 50 Ohm coax cable has a stranded outer conductor and a bare copper center conductor. It is 100 percent foil and 88 percent coverage braided shield prevents loss
|
RG-58 - 50 ohm, Black PVC .195" Jacket, Polyethylene Dielectric, #20 Stranded, tinned copper Conductor, 96% tinned copper braid Shield, 66% Velocity of Propagation, and a Capacitance of 30.5 pf/ft
|
(4) Pack Amphenol PL-259 Connector Kit. Included are (4) 2 in. Pieces of our 1/2" Adhesive Heat Shrink Tubing (3:1 Shrink ratio) at no additional cost. Cable Type: RG-8, RG-10, RG-213, RG-225 - Shell: Brass plated with Nickel, Body: Brass plated with Silver. Contact pin: Silver plated.
|
RG-217 - 10 AWG solid BC, solid PE, double BC braid, black PVC (type IIA) jacket
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 Conductor Zip Power Cord ideal for AC and DC power applications, 14 AWG 19/27 Bare Copper
|
Break Strength 2600 Lbs. Double braided, polyester (AKA Dacron). UV, mildew, rot and stretch resistant low coefficient of friction & high resistance to abrasion.
|
14 AWG, 7 Strands - Bare Copper Clad Steel Wire:
|
Break Strength 2600 Lbs. Double braided, polyester (AKA Dacron). UV, mildew, rot and stretch resistant low coefficient of friction & high resistance to abrasion.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Zip Power Cord - 12 AWG 65/30 bare copper"
PER FT"
|
Inner Conductor Stranded BC 0.056 (1.42),
Dielectric Foam Polyethylene 0.150 (3.81),
Outer Conductor Aluminum Tape 0.155 (3.94),
Overall Braid Tinned Copper 0.178 (4.52),
Jacket Black Thermoplastic Elastomer 0.240 (6.10)
|
200FT - RG-8U - 10 AWG solid .108" bare copper conductor, semi-solid polyethylene insulation, Duobond II® + tinned copper braid shield (90% coverage), PVC jacket.
|
450 ohm, #18, 19 strand copper clad steel ladder line, PE jacket. <1500W
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
14 AWG, 7 Strands - Bare Copper Clad Steel Wire:
|
M17/111-RG303 Solid
silver-coated copper clad steel conductor with a polytetrafluoroethylene
(PTFE) dielectric, fluorinated ethylene propylene (FEP) jacket, and an
overall braid shield of 36 AWG silver-coated copper braid shield
|
RG-6 CATV-60, 75 ohm, solid BC, foam polyethylene (PE), foil w/ 60% AL braid coverge, black PVC jacket
|
150FT - RG-8U type, 13 AWG stranded (7x21) .085" bare copper conductor, polyethylene insulation, bare copper braid shield (95% coverage), PVC jacket.
|
|